BD8 RB Nelson Conventional Cabinet –

Zoom the image with the mouse

BD8 RB Nelson Conventional Cabinet

USED Nelson

BD8 RB Raised Bottom Conventional Cabinet 2015

This cabinet has a custom removable shelving unit installed.

All Digital, All the Time. Electronic thermostats included in all Nelson dipping cabinets takes the guess work out of the perfect temperature setting. T-stats adjust from -30 to +30 degrees.

Front Breathing cabinets allow for flexibility in proper placement in cabinetry or against a wall & Permanent Stainless Steel Gaskets will never need replacing.

BD8-RB Specifications:

  • One piece 22 ga. 304 stainless steel, all corners welded (no corner pieces or raw edges, ever)
  • Galvanized steel reinforced sub-top beneath the stainless top
  • Anti-condensate heater wires on galvanized sub-top to prevent condensation on cabinet top
  • 24 ga stainless steel interior. Optional 22 ga. 304 stainless steel exterior
  • Copper tubing cold wall type evaporator attached to liner wall
  • Forced air condensing unit (clog free design on all BD models) on glide-out base for efficient operation and built-in applications
  • Base of cabinet to be constructed of 16 ga. Galvanized steel
  • Unit NSF & UL and/or ETL approved.

Model: BD8-RB
Ship Wt. 400
Refrigernat: R290
# of Facing 3 Gal 11
5 gallon tub capacity 8
Compressor NLE8.8CN
Temp Range -30 deg F to +20
Electric 115v., 8 amps


When your order arrives, please make sure that you inspect the equipment carefully when you receive it from the carrier. If there is any visible damage, please mark "damaged" on the carrier paperwork.

You need to make sure you unwrap the equipment - all boxes/pieces to make sure that everything ordered is there, and that it isn't damaged. WE CANNOT PUT IN A CLAIM IF YOU DO NOT MAKE A NOTATION OF SOME SORT ON THE SHIPPING PAPERWORK. The delivery person can't leave until you sign the paper work. If there is a chance that the person who placed the order and is reading this policy will not be there during delivery of the shipment, make sure the store personnel is aware of the policy. Damages not noted because you were not there at the time of the delivery, and someone else received it who did not note them on the paperwork, will not be eligible for the claims process. PLEASE make sure everyone who might be there to receive the shipment understands this.

Again, a notation of damage on the paperwork will make it easier for us to put in a claim. If the damage is excessive, refuse the shipment (new equipment only, used or customer equipment cannot be refused)and have them send it back to us. We will ship a replacement unit out immediately. If the damage is minor or obviously cosmetic, please note this on the paper work and go ahead and accept the equipment. You can call and e-mails us a few pictures of the cosmetic damage, and we will work out a partial refund that is relative to the damage and acceptable to you. 

If the equipment does not work when you plug it in, give us a call right away. Our goal is to make sure you are happy with what you get and that it works right from day one.


The return/refund policy on NEW Equipment and USED or CUSTOM equipment are different. You have 3 days to return brand new equipment for a full refund less shipping and a 20% restocking fee. Custom equipment like dipping carts or used equipment cannot be returned and must be accepted when delivered. We guarantee custom equipment and used equipment will be in good working condition when you receive it, and if not, as long as you report the mechanical problem within the first 14 days you have the equipment, we will get it fixed and cover the cost of doing so unless we have a separate stated warranty on a specific deal. Custom or used equipment cannot be returned under any circumstances. Should it not be in working order when you get it, we will get it fixed. If we can’t get it fixed, we will refund your money. On standard new equipment, you must notify us within 3 days by sending an email to stating that you want to return the equipment. We will refund your payment less appropriate shipping and restock fees and coordinate for the equipment to be picked back up. See "shipping" policy link for instructions on how to properly receive equipment.

You have successfully subscribed!
This email has been registered