BD8CE-05 Dipping Cart w/ Three-Compartment Sink
BD8CE-05 Cold Plates & Three-Compartment Sink
Our ice cream carts are built from the highest quality materials and designed for indoor or outdoor use. Able to be used for ice cream, Italian ices, and gelato, we start with a standard freezer box and mount it on a heavy-duty frame with the best 6-8” casters available. All carts are made to order, with optional add-ons, such as sink systems, cold plates, and/or canopies.
We include lids and lid lock bars, cord wrap cleats, sneeze guards, and digital controls. We also offer printing and installation of your graphics before shipping (additional costs apply). We encourage all customers to check with their local permitting agencies prior to ordering, as vending requirements vary by area.
The BD8CE-05 Includes:
- Cold plates
- 3 Compartment Sink
- Cash Drawer
- Standard Sneeze Guard
- Flip doors & lock bar
*Graphics available for an additional cost
When Ordering Cold Plate Carts, please let us know what you are planning on selling: Novelties, Dipping Ice Cream, Italian Ice, Gelato, Other.
|Type:||Dipping Cart with Three-Compartment Sink|
|Capacity:||11 Tubs (8 above & 6 in storage)|
|Electrical:||115 Volts & 60 Hz (optional 220 volt)|
BD8CE-05 with Sink Drawing/Dimensions:
Specifications for (all) BD#-(DIP)CE-##:
- Lid Locks standard on all cart models
- Top to be stainless steel, standard. Optional solid surface or laminate materials available.
- Bas frame welded aluminum
- All exposed corners welded and polish smooth
- Finished exterior white lexan standard. Other graphic options available
- Wheels 6” diameter hard rubber (2) swivel w/ brake (2) rigid. Load rating of wheel a minimum of 350lbs ea. Optional 8” casters available.
- Interior stainless steel, standard
- Bottom drain for defrost.
- Electronic thermostat standard.
- 5 year limited warranty against cold plate defect,
- insulation failure or internal tubing leaks.
- NSF & ETL approved for outdoor use.
- 115volts, optional 220 volts
- Sink system requires separate 15 amps of 115 volt electricity
When your order arrives, please make sure that you inspect the equipment carefully when you receive it from the carrier. If there is any visible damage, please mark "damaged" on the carrier paperwork.
You need to make sure you unwrap the equipment - all boxes/pieces to make sure that everything ordered is there, and that it isn't damaged. WE CANNOT PUT IN A CLAIM IF YOU DO NOT MAKE A NOTATION OF SOME SORT ON THE SHIPPING PAPERWORK. The delivery person can't leave until you sign the paper work. If there is a chance that the person who placed the order and is reading this policy will not be there during delivery of the shipment, make sure the store personnel is aware of the policy. Damages not noted because you were not there at the time of the delivery, and someone else received it who did not note them on the paperwork, will not be eligible for the claims process. PLEASE make sure everyone who might be there to receive the shipment understands this.
Again, a notation of damage on the paperwork will make it easier for us to put in a claim. If the damage is excessive, refuse the shipment (new equipment only, used or customer equipment cannot be refused)and have them send it back to us. We will ship a replacement unit out immediately. If the damage is minor or obviously cosmetic, please note this on the paper work and go ahead and accept the equipment. You can call and e-mails us a few pictures of the cosmetic damage, and we will work out a partial refund that is relative to the damage and acceptable to you.
If the equipment does not work when you plug it in, give us a call right away. Our goal is to make sure you are happy with what you get and that it works right from day one.
The return/refund policy on NEW Equipment and USED or CUSTOM equipment are different. You have 3 days to return brand new equipment for a full refund less shipping and a 20% restocking fee. Custom equipment like dipping carts or used equipment cannot be returned and must be accepted when delivered. We guarantee custom equipment and used equipment will be in good working condition when you receive it, and if not, as long as you report the mechanical problem within the first 14 days you have the equipment, we will get it fixed and cover the cost of doing so unless we have a separate stated warranty on a specific deal. Custom or used equipment cannot be returned under any circumstances. Should it not be in working order when you get it, we will get it fixed. If we can’t get it fixed, we will refund your money. On standard new equipment, you must notify us within 3 days by sending an email to firstname.lastname@example.org stating that you want to return the equipment. We will refund your payment less appropriate shipping and restock fees and coordinate for the equipment to be picked back up. See "shipping" policy link for instructions on how to properly receive equipment.