Nelson BD12DIPHV Gelato Cabinet
Nelson BD12DIPHV Gelato Cabinet
The Nelson BD12DIPHV is a curved glass Ice cream cabinet, HV Stands for - high-visibility cabinet. These beautiful curved glass dipping cabinets offer a clear view and a distinctly European look that makes them great for gelato, Italian ice, and Ice cream. They can be racked for either three gallon tubs, Ropak plastic tubs - 4.2 liter or 5 liter gelato pans.
We don't recommend that you rack both gelato and ice cream because the temperatures can vary, but if you ever decide to switch up your product, this cabinet will still work great.
Air Flow in/out through service vent allowing installation into counters.Cut-outs for air vents needed on customer side for All Cabinets
- Low Cabinet Height
- Stainless Steel Interior
- All digital thermostats
- A stainless steel gasket finishes the freezer opening. No rubber seals to wear or replace.8DIP-HV.12DIP-HV and 16DIP-HV sizes available
- LED lighting
- Digital thermostats for a wide range of frozen desserts
Pricing includes shipping in the US and the Can Collar Racking System. *If Ropack system is needed there may be a small up charge
|Capacity:||(20) 3-Gallon Cans|
|Tempature Range:||-10 Degrees F. to +30 Degrees F.|
|Compressor H.P.:||5/8 H.P. SC16CLX.2|
|Electrical:||115 V., 10 AMPS|
When your order arrives, please make sure that you inspect the equipment carefully when you receive it from the carrier. If there is any visible damage, please mark "damaged" on the carrier paperwork.
You need to make sure you unwrap the equipment - all boxes/pieces to make sure that everything ordered is there, and that it isn't damaged. WE CANNOT PUT IN A CLAIM IF YOU DO NOT MAKE A NOTATION OF SOME SORT ON THE SHIPPING PAPERWORK. The delivery person can't leave until you sign the paper work. If there is a chance that the person who placed the order and is reading this policy will not be there during delivery of the shipment, make sure the store personnel is aware of the policy. Damages not noted because you were not there at the time of the delivery, and someone else received it who did not note them on the paperwork, will not be eligible for the claims process. PLEASE make sure everyone who might be there to receive the shipment understands this.
Again, a notation of damage on the paperwork will make it easier for us to put in a claim. If the damage is excessive, refuse the shipment (new equipment only, used or customer equipment cannot be refused)and have them send it back to us. We will ship a replacement unit out immediately. If the damage is minor or obviously cosmetic, please note this on the paper work and go ahead and accept the equipment. You can call and e-mails us a few pictures of the cosmetic damage, and we will work out a partial refund that is relative to the damage and acceptable to you.
If the equipment does not work when you plug it in, give us a call right away. Our goal is to make sure you are happy with what you get and that it works right from day one.
The return/refund policy on NEW Equipment and USED or CUSTOM equipment are different. You have 3 days to return brand new equipment for a full refund less shipping and a 20% restocking fee. Custom equipment like dipping carts or used equipment cannot be returned and must be accepted when delivered. We guarantee custom equipment and used equipment will be in good working condition when you receive it, and if not, as long as you report the mechanical problem within the first 14 days you have the equipment, we will get it fixed and cover the cost of doing so unless we have a separate stated warranty on a specific deal. Custom or used equipment cannot be returned under any circumstances. Should it not be in working order when you get it, we will get it fixed. If we can’t get it fixed, we will refund your money. On standard new equipment, you must notify us within 3 days by sending an email to firstname.lastname@example.org stating that you want to return the equipment. We will refund your payment less appropriate shipping and restock fees and coordinate for the equipment to be picked back up. See "shipping" policy link for instructions on how to properly receive equipment.