magnifier

Zoom the image with the mouse

Nelson BD14 Double Row Dip Cabinet

New
BD-14
Our cabinets have more insulation than most other ice cream freezers- 2-1/2" of insulation on the sidewall. This feature means lower operating costs than our competitors. Nelson BD14 Double Row Dip...
$6,790.00
$6,790.00
Our cabinets have more insulation than most other ice cream freezers- 2-1/2" of insulation on the sidewall. This feature means lower operating costs than our competitors.
Nelson BD14 Double Row Dip Cabinet

Nelson BD14 Double Row Dip Cabinet


erfect preservation of product quality and flavor...continuous failure-free operation that virtually eliminates maintenance...absolute minimum of operating costs...these are the advantages offered by Nelson's superior design and construction which can only be measured over long periods in terms of service and value. Since 1898, the industry's finest equipment for the protection of quality and flavor in ice cream and frozen foods.
Our cabinets have more insulation than most other ice cream freezers- 2-1/2" of insulation on the sidewall. This feature means lower operating costs than our competitors.
We offer the largest selection in the industry, all in a standard white enamel finish or optional stainless interior,exterior or both. All cabinets equipment with digital thermostats, clog-free condensing units and optional features such as locking devises, legs or casters.

Features:
  • Capacity- 29.5 Cu Ft
  • NBR Facings- 18
  • Total NBR Tubs- 33
  • Compressor- Sm 1/2 hp
  • Electric- 115v
  • Can storage- 15

Specification:
  • One piece 22 ga. 304 stainless steel, all corners welded (no corner pieces or raw edges, ever).
  • Galvanized steel reinforced sub-top beneath the stainless top, Anti-condensate heater wires on galvanized sub-top to prevent condensation on cabinet top.
  • 24 ga stainless steel interior, Optional 22 ga. 304 stainless steel exterior.
  • Copper tubing cold wall type evaporator attached to liner wall.
  • Forced air condensing unit (clog free design on all BD models) on glide-out base for efficient operation and built-in applications.
  • Base of cabinet to be constructed of 16 ga. Galvanized steel.
  • Poured-in place urethane foam insulation with a minimum "K" factor of .13.
  • Lids to be stainless steel top with poured urethane foam insulation and hinged in the center with rubber handles.
  • Freezer lid gaskets to be of a molded, one piece, high impact grade ABS plastic.
  • Cabinet to be equipped with a 7-ft power cord, 3 wire, grounded, dead front construction.
  • Unit to be NSF & ETL approved.


Spec Drawing Sheet

For a beginners business guide to cart vending, check out our free ebook!

Free Ice Cream Business Plan
Check out our FREE Ice Cream Business guide to help you decide which set-up is right for you!
Our ice cream cabinets are also available with raised-bottom freezers for those operators who do not use the lower step in a conventional freezer. The cabinets can be made with optional dry storage in the lower area.

.Features:

  • Capacity- 29.5 Cu Ft
  • Compressor- Sm 1/3 hp
  • Electric- 115v

SHIPPING POLICY

When your order arrives, please make sure that you inspect the equipment carefully when you receive it from the carrier. If there is any visible damage, please mark "damaged" on the carrier paperwork.

You need to make sure you unwrap the equipment - all boxes/pieces to make sure that everything ordered is there, and that it isn't damaged. WE CANNOT PUT IN A CLAIM IF YOU DO NOT MAKE A NOTATION OF SOME SORT ON THE SHIPPING PAPERWORK. The delivery person can't leave until you sign the paper work. If there is a chance that the person who placed the order and is reading this policy will not be there during delivery of the shipment, make sure the store personnel is aware of the policy. Damages not noted because you were not there at the time of the delivery, and someone else received it who did not note them on the paperwork, will not be eligible for the claims process. PLEASE make sure everyone who might be there to receive the shipment understands this.

Again, a notation of damage on the paperwork will make it easier for us to put in a claim. If the damage is excessive, refuse the shipment (new equipment only, used or customer equipment cannot be refused)and have them send it back to us. We will ship a replacement unit out immediately. If the damage is minor or obviously cosmetic, please note this on the paper work and go ahead and accept the equipment. You can call and e-mails us a few pictures of the cosmetic damage, and we will work out a partial refund that is relative to the damage and acceptable to you. 

If the equipment does not work when you plug it in, give us a call right away. Our goal is to make sure you are happy with what you get and that it works right from day one.

REFUND POLICY

The return/refund policy on NEW Equipment and USED or CUSTOM equipment are different. You have 3 days to return brand new equipment for a full refund less shipping and a 20% restocking fee. Custom equipment like dipping carts or used equipment cannot be returned and must be accepted when delivered. We guarantee custom equipment and used equipment will be in good working condition when you receive it, and if not, as long as you report the mechanical problem within the first 14 days you have the equipment, we will get it fixed and cover the cost of doing so unless we have a separate stated warranty on a specific deal. Custom or used equipment cannot be returned under any circumstances. Should it not be in working order when you get it, we will get it fixed. If we can’t get it fixed, we will refund your money. On standard new equipment, you must notify us within 3 days by sending an email to equipment@turnkeyparlor.com stating that you want to return the equipment. We will refund your payment less appropriate shipping and restock fees and coordinate for the equipment to be picked back up. See "shipping" policy link for instructions on how to properly receive equipment.

You have successfully subscribed!
This email has been registered